Showing posts with label Gardening. Show all posts
Showing posts with label Gardening. Show all posts

Tuesday, 8 February 2011

Building a shed base for our new Addition Bike Storage Unit – On a budget (Part1)

In these tough economic times we are all looking to save money where we can.  So, we asked a local DIY enthusiast (and ex-builder) to talk us through how to put a simple base down for an Addition Bike Storage Unit.  However, to make things a little harder we set him a budget. 
 
The task was simple:  Build a shed base in my garden suitable for an Addition bike storage unit for less that £50.   We thought that this couldn’t be done... how wrong we were.
 
Addition bikestore
Addition Bike Shed - store your hybrid bicycle in here!

The Addition bike store is the original bike storage solution from Asgard which has been described by Bike Radar Magazine as “The best bike storage they we have seen” .  Designed to house up to 3 bikes, the Addition  unit is built from tough galvanised (weatherproof steel) and features a heavy duty 3 point locking system.
The Addtion secure bike storage unit is quite a heavy unit for it’s size - Heavy enough to be a deterrent to thieves but not so heavy you require an industrial grade base to sit it on.

Stage 1: Where to put it? 
The Addition bike store measures 1800mm x 800mm – So I will be looking for a space around 2 meters x 1 meter for the actual unit, then a further 2 meters in front of the unit to allow easy access..  An area has been allocated already – this is not an ideal area, there are a number of tree roots and lumps of rock in the way.   The area is also close to over hanging trees which may need cutting back. 

Where to put your Asgard bike store
Decide where to put your Asgard bike store
Asgard recommend you leave a couple of meters between your unit and any walls, this stops and thieves from using a wall as leverage to try and move the units.  Leaving space around the unit will also help to keep condensation down as air flows through the hidden vents in the roof.  As this unit is tight against the wall there is no change is can be used as a lever. 

Stage 2: Mark out the area.   
'Measure twice cut once' has always been my moto.  So, I have marked out roughly where the shed base will be using wooden batons.  As you can see, we may just get away with not cutting back the trees in this case.
Batons mark the spot
Batons mark the spot
TOP TIP:  Making a cheaper frame.
Delivery palettes come in lots of standard sizes, I have found one that happens to be 2.1m x 1m.  There are hundreds of these things all over the place and normally free (if you ask nicely).  So I asked a local  store if I could have one and simply knocked the palette apart with a hammer.
I now have a ready made, perfect size frame – no cutting  and most importantly no trip to B&Q on a bank holiday weekend!

 More in part 2 – Coming soon.

Wednesday, 15 December 2010

I have put my Metal Bike shed together, but I want to move it without a rebuild!

If your shed isn’t too big and heavy (small sheds such as the Addition Bike Storage units), moving it is reasonably easy assuming the ground is reasonably flat. You could even manage to do this on your own but its always nice to have some help - and as they say - two heads are better then one!

Step by step instructions for moving a Metal Shed installed in your garden.

You will need: 2 pieces of Plywood – wider than the unit by around 100mm (6mm thickness Plywood will be fine).

 1: Gently, lift the far end (the direction you want to go) and slide the plywood under the shed by a couple of inches.
 2: Go back to the other end and push – The unit will simply slide over the plywood (almost) effortlessly – push the unit until just short of the end of this 1st piece of plywood, then stop.
3: Place the next piece of plywood next to this then continue to push the unit. The unit should slide over onto the next piece of Plywood – Repeat as many times as necessary.

The unit will slide along the ground with minimal effort. In the case of the bigger units we would recommend you at least part dismantle the unit before attempting such a move and not to tackle the big units on your own.

And there you have it.  If you are attempting this, I think it goes without saying to make sure the unit is empty and there is nothing stored inside it.  Also, make sure your concrete base at the new location is prepared and ready for the unit.
Related Posts Plugin for WordPress, Blogger...